This video will cover how to install
your U-verse Wi-Fi Gateway.
This process involves connecting your phone line,
computer, or other wireless devices to the Wi-Fi Gateway,
and then logging on to a website to activate
your service.
This could take up to 45 minutes.
First, you will want to check your service activation date
and time, located on your confirmation letter,
to determine when you can begin setting up
your Internet service.
If you have a home security system
or health-alert system installed in your home,
you'll need to contact your provider
after you finish installation to ensure their services
haven't been affected.
Now let's gather all the materials you'll need for setup.
First, you'll need your account information.
This is your high-speed Internet account number.
This number can be found on your confirmation letter
or packing slip.
You will also need the four-digit passcode you created
when you placed your order.
This passcode may have been mailed to you
separate from your equipment.
 |
| U-verse Wi-Fi Gateway Self Install | AT&T |
If you are already an AT&T customer,
you'll also need your AT&T email address
or member ID and password.
Go to ATT.com/myatt for help if you have forgotten
this information.
From the box you received, you'll find
the self-install guide, which includes step-by-step
installation instructions and support information,
the Wi-Fi Gateway, the power adapter,
a yellow Ethernet cable, a green data cable,
and phone filters.
If you don't have traditional dial tone phone service,
you won't need to install filters
and can skip the next two steps by moving forward to 3:15
in the video.
If you have traditional phone service,
you may need the dual-port filter
and up to three single-port filters.
If you need additional filters, please visit att.com/equipment.
4Without filters, you may experience disruptions
or static on the phone line.
Some users may have a connection for data
separate from their traditional phone line.
These users may not need filters.
First, if you have traditional phone service,
1install single-port filters on every wall jack with a phone,
5fax machine, satellite receiver, or other connected device.
Then connect the phone line from the device to the filter.
Next, if you want to connect a phone
or other piece of equipment, such as a fax machine,
to the same wall jack as your Wi-Fi Gateway,
then you will need to install the dual-port filter.
Begin by connecting the phone cable of that device
to the phone port of the dual-port filter.
Next, connect the green data cable to the port labeled "DSL"
on the dual-port filter.
That port is surrounded by a green outline.
If you don't have traditional phone service,
connect the green data cable directly to the wall jack
and connect the other end to the DSL port of your Gateway.
That port is surrounded by a green outline.
Next, connect one end of the yellow Ethernet cable
to one of the Ethernet ports on the back of the Gateway.
Those ports are surrounded by a yellow outline.
Connect the other end of that cable to the Ethernet port
on your PC.
Next, remove the sticker covering the power port
on your Wi-Fi Gateway.
Then, connect one end of the power cable
to an electrical outlet and the other end
to the Wi-Fi Gateway's power port.
Your Gateway will now power up.
You'll need to wait for your power, broadband,
and service lights to turn solid green.
During this time, which can take up to 15 minutes,
do not unplug the power cord or the green data cable,
as this can permanently damage the Wi-Fi Gateway
and significantly delay service activation.
If after 15 minutes your broadband light
does not turn solid green, check to make sure
all your connections are secure, and then try a new wall jack.
Now you should have an established connection
between your Gateway and a connected PC.
It's time to register your new service.
Begin by opening an Internet browser
such as Internet Explorer or Firefox.
The online registration process should start automatically
to assist you in registering your new service.
If for some reason the registration process
doesn't start automatically, you can go
to www.att.net/uverse.
To complete online registration, you will need
the four-digit passcode you created when you placed
your order.
This passcode would have been mailed
to you separately from your equipment.
You should now be connected to the Internet.
You can now configure your Wi-Fi network,
such as a laptop, smartphone, or tablet.
Write down your Wi-Fi network name (SSID),
and Wi-Fi password (wireless network key)
to configure a Wi-Fi device.
This information is on the side of your Wi-Fi Gateway.
The network name consists of "ATT"
plus the last three digits of the Wi-Fi Gateway serial number.
and refresh the network list.
Next, scroll through the list, and select
your Wi-Fi network name.
With your Wi-Fi network selected,
enter the 10-digit Wi-Fi network password.
You should now be connected to the Internet via Wi-Fi.
If you have additional questions
or need more help with your U-verse Wi-Fi Gateway,
go to att.com/uversesupport.
View Video U-verse Wi-Fi Gateway Self Install | AT&T
U-verse Wi-Fi Gateway Self Install
- u verse internet self install
- uverse wifi gateway
- att uverse wifi gateway
- uverse wifi gateway purchase
- att uverse internet self installation
- att uverse self install broadband light blinking red
- att uverse tv setup
- att uverse internet self installation guide pdf
0 komentar:
Posting Komentar